Leading healthcare safety and technologies uses the Vulcan descaler to solve the scaling problems of the hot water system with high temperature (more than 80 °C) in their steam room.
Vulcan Electronic mineral descalers solve scaling problems in the cooling towers of a molding factory.
Before Vulcan S100 was installed in hotel’s main hot water line, the storage tanks had a solid 3 cm thick scale layer inside them and the pumping pressure from the booster set was at maximum while being unable to deliver adequate water pressure to the end of the line hotel rooms.
The condenser and the oil cooling system have problems such as scaling and biological slime. It needs to be cleaned once every 3 months. The normal scale inhibitor dosage is about 200 kg per month. Besides, algaecide needs to be added every year from April to October. The Vulcan descaler save this company 4,733 USD every year!
The cooling tower system required manual cleaning 4-6 times a year. 6 months after installing the Vulcan S100 no new scale had formed in the cooling system
Before installing the Vulcan electronic hard water mineral descaler, Hyundai Motor Ulsan had mineral scale problems in the pipelines and the induction hardening machine. The factory also had 9 secondary small pipes that had to be manually cleaned every 2-3 months.
Vulcan S150 device used to solve the scaling problems of the injection molding machine.
One of the biggest steel companies in Europe uses the mineral descaling technology to support their UHP furnace and cooling towers.
Every month the heat exchanger efficiencies dropped dramatically because of an increase in pressure between inlet and outlet of the heat exchanger. Vulcan S250 models were installed and after 5 months there have not been any mineral scale pressure issues in the cooling towers or heat exchangers.
GREEN Mineral Descaling Technology used at Umpqua Bank to descale hot water boilers and cooling tower
Page 3 of 5
