Before installing the Vulcan descaler device our factory used a scale inhibitor as the only descaling method; we would have to replace the RO membrane every 1-3 months. Since installing the Vulcan descaler the RO membrane has lasted for 7 months; saving our company 25,000 USD.
We were skeptical about the Vulcan device and doubted its claim to remove mineral scale. After about a 3 month trial using the Vulcan S50, the scale on the equipment has been significantly reduced. This not only saves a lot of water treatment costs but also greatly improved the efficiency of the equipment and our cleaning intervals have been prolonged.
Every 6 months the engineering staff had to manually remove scale from pumps, valves, kitchen equipment and from the 102 individual electric hot water heaters. After installing the Vulcan descalers scale was easily flushed out. After a second inspection the units were found to be almost entirely free of scale.
Before Vulcan S100 was installed in hotel’s main hot water line, the storage tanks had a solid 3 cm thick scale layer inside them and the pumping pressure from the booster set was at maximum while being unable to deliver adequate water pressure to the end of the line hotel rooms.
The condenser and the oil cooling system have problems such as scaling and biological slime. It needs to be cleaned once every 3 months. The normal scale inhibitor dosage is about 200 kg per month. Besides, algaecide needs to be added every year from April to October. The Vulcan descaler save this company 4,733 USD every year!
Before installing the Vulcan electronic hard water mineral descaler, Hyundai Motor Ulsan had mineral scale problems in the pipelines and the induction hardening machine. The factory also had 9 secondary small pipes that had to be manually cleaned every 2-3 months.
Page 3 of 4